How To Find Your Roof Leak & Fix It Fast.

While many homeowners enjoy performing do-it-yourself projects around the house on the weekends, most of them choose to add paint to the interior or exterior of the home. Others elect to install new bathroom fixtures, change the flooring in the home, or simply work on the landscaping. However, there is a significant home improvement project that any homeowner can perform that can save the roof.

Independent of where the homeowner resides in the country, nearly every house has the same issues regarding the roof. When the gutter system becomes overflowed, or plugged up due to a clogged drain, it can cause significant damage to the roof. This is often a result of a buildup of leaves, branches, twigs and debris that gets lodged either in the gutter, or the downspout.

Significant damage can be caused to the roofing system when the gutter remains clogged with debris and leaves. It is quite easy for the water to get up underneath shingles or tile and cause damage along the fascia boards and the plywood residing just beneath the tile or shingles. The only way to ensure that the roof will remain in proper condition is to keep the gutter system operating as it is design.

Roof Leak

What to Do If You Find a Leak in Your Roof

Look leaks are nothing to laugh about. But they are also nothing to panic over either. With the right knowledge, you can take control of the situation with confidence, and find the proper solutions in a convenient time frame. Continue reading to learn which steps to take next toward a safe and effective solution if you have just discovered a minor to moderate, slow roof leak. On the other hand, for emergency service and repair you should immediately contact a licensed and local roofing contractor if you have just had a major rupture in your roof that has resulted in a severe leak.

Minor to Moderate Roof Leaks

Even they are still an area that requires immediate attention and remediation when roof leaks are minor to moderate in nature, or slowly leaking. The longer a leak continues the more damage it can do overtime. This includes costly structural damages, as well as health risks associated with mold inhalation. Even a single drip is something to be concerned about. Furthermore, a small leak can quickly turn into a larger one. The best course of action to take upon discovering a leak in your roof is to gather materials to control the water flow, before any immediate damage can be done to your carpets, flooring, floorboards, and dry wall. If you do not have all the recommended materials, do your best to manage the leak with whatever you have on hand.

Here’s what you can use:

  • Dry Towels and Rags
  • Plastic Tarps or 40 GL Trash Bags
  • Large Bucket or Garbage Receptacle
  • Floor Fans

Is a Rubber Roof a Good Choice for My Home?

Rubber roofing is more accurately referred to as EPDM (ethylene propylene diene terpolymer) roofing, and is the most common thermoset roof membrane in the industry. EPDM is mainly contains two compounds, ethylene and propylene, which are derived from oil and natural gas. In terms of installation, there are a few options. Most often, they are either fully-adhered, mechanically attached using batten bars, or ballasted.

Advantages

  • One of the main advantages of EPDM systems are the cost-savings. It is one of the most inexpensive, quality roofing options compared to other materials.
  • The majority of investment will be for the professional installation, since it requires specialized training, equipment, and resources. In comparison to other options, this is still much cheaper.
  • If you are looking for a quality product that lasts a long time and doesn’t break the bank, EPDM is something you should consider.
  • Another admirable advantage is the ease of installation.
  • There is little-to-none construction, making installation quick and simple to do.
  • The product is lightweight, flexible, and easier to work with, so contractors can get the job done in as little as one day (in most cases), which also reduces labor costs incurred by the homeowners.
  • •Furthermore, the test of time can be stood by the rubber roofing. Delivering an average lifespan of 50 years or moret is durable and long-lasting.
  • It is also resistant to high winds, inclement weather, harmful UV rays, fading, and more. With less seams and openings, the risk of water leakage is reduced significantly.
  • Maintenance is also virtually non-existent. Homeowners may choose to repaint after 10 years or so; but this is not always necessary.
  • Lastly, in the case that your rubber roof would need repaired, you can expect repairs to be easy, quick, and cheap.
  • It is easier to fix rubber roofing than most other materials.
  • For minor repairs, all your contractor might need is a tube of liquid rubber or special tape. This is usually the case.

You are not Safe Now! Adapt these Door Lock Systems

Types of Electronic Door Locks

For thousands of years the people and things behind the door and many doors have been protected by the locks and keys but speaking of how doors are not locked, today’s technology is quickly changing. The traditional key locks are being replaced by the electronic locks.

There are three main types that you can find on the market today although there are many different types of electronic door locks.

Keypad locks

Although they are little different from your traditional locks but technically speaking they do qualify while some may feel that these are not electronic locks. There is a keypad above the door handle or knob which is generally numbered from nine to zero. It will cause the door to unlock it is convenient in some situations to not need an actual physical key. You do not need to dig for you key with this type of electronic locks and you can give them the code if you have a guest visiting so without you having to give them a key they can come and go. If it is necessary to do so the code you use can also be changed. As you are still physically required to touch the lock to put in the code the convenience they afford is minimal.

Key fob locks

These are similar to the remote car locks where you activate the electron door lock using the fob instead of entering the code manually on the keypad. The door can be locked or unlocked just by pressing a button on the key fob. These are much more convenient because you can lock the door as you leave or unlock it when you get home as long as you are within several feet of the door. They will not work over the internet like a remote access lock does.

Remote access locks

These types of electronic door locks are the most convenient of all three types and they are also the only ones that will improve the security of your home. Unlocking and locking the door is similar to using a key fob but they can also be used if you are not home. They are able to be managed anywhere you can get an internet connection. It is an electronic lock that integrates with you home security system. The most security and convenience is offered to you by this electronic door lock. You can do a variety of things with a remote access lock that can include:

• If you forgot to do that before you left the home, lock the door

• Check to make sure that after they left the children locked the door

• When you are not there and a service person like a plumber is coming to the home, unlock the door if you have.

What Is A Registered Lock Code?

Before we discuss a Registered Lock Code, let’s discuss just what this is. When a lock is assembled pins are placed inside. These pins allow the opening and closing of the lock with the key. There must be a way to transfer the locking pins to cuts on the key. This is called the code.

A registered lock code is assigned and registered to a user or company. Only authorized users can order cut keys. These types of codes are usually used on high security locks as an effort to control access. Our Company will maintain these in a custom designed computer database. This database will help to avoid repeating the codes so once assigned they will never be duplicated or assigned to another user.

These types of codes are usually “Blind”. This means that by looking at the number you will not be able to convert it to a key cut. A lock code chart is needed to convert the code to a key cut that will match the locking pins in the lock and operate it.

With many non-registered codes, it is very easy to convert the code to a cut. For many, the code is the cut. This lowers the overall security as it gives no key control. To know how many keys were cut for a code and on what date who ordered those keys key Control is the ability. Registered lock codes and Key control go together.

At authorized service centers high security locks are usually found. They are more expensive than big box store products, so you first must decide what you are protecting and how much is that worth to you. After making that decision, you will know where to make a purchase.

When you purchase a high security product, registered codes are assigned to you. By keeping these codes you will be able to order additional keys later. Based on if you order locks keyed alike, keyed different or master keyed the number of registered codes you get is decided.