How to Replace Leaky PVC Valves in Your Bathroom?

Look for areas in your bathroom where water has pooled or anywhere you have noticed a slight dripping, such as behind the toilet. Check you supply valve and hose for corrosion. If they appear to have any corrosion, it may be time to replace one or both. A relatively small expense now could save you from spending more money in the future.

Fixing any issue requires three simple steps. We’ll use that method to replace leaky valves on your toilet.

The three simple steps are:

                1. Identify the leaky valve causing the issue.

                2. Create a list of tools and supplies needed.

                3. Replace the parts.

While these simple steps sound easy, more goes into each step.

Tools Needed

If you’re replacing both the supply valve and the hose, you’ll likely need these tools.

-2 adjustable open-end wrenches, sometimes called a crescent wrench

-1 rib joint plier, also called a tongue and groove plier

-1 bucket to collect draining water

The supplies needed will vary based on what you’re replacing. For our example, we’ll replace the hose and the supply valve.

We’re going to use BrassCraft Compression Angle Stop and toilet tank hose. Buying parts similar to what you’re removing is best, but always measure just to be sure.

Replacing the Parts

1. Shut off the main water supply to the house. If you don’t know where this valve is located, you’ll need to search for it. If you have a basement or crawl space, it may be located on a wall near the front of the house.If you are on a slab foundation, check near the water heater or in the garage, look for where the water is entering your house and you’ll find the valve. Still can’t find the valve? Look outside near the street in a covered box buried in the ground. Still can’t find the valve? Calling a local plumber or checking your home inspection report may be the next best step.

2. Now that the water supply to the house has been shut off, turn on the cold water in the bathroom sink.This will relieve some of the water pressure so that when you remove the valve, the amount of water draining is minimal.

3. Remove the toilet’s tank lid. Flush the toilet to drain the water from the tank.

4. Place your bucket under the supply valve.

5. Prepare your new valve by removing it from the box. Remove the nuts from the valve and turn the valve off for quick installation.

6. Take your rib joint plier and remove the hose from the toilet tank.

7. Place one open-end adjustable wrench on the supply valve and the other on the compression nut. Hold the water supply valve in place and loosen the nut with the second wrench. Once loose, turn the compression nut by hand and remove the water supply valve. Expect water to drain out of the pipe.

8. Quickly place on the new valve. Inspect the existing compression ring for damage. Typically, the ring and nut do not need to be replaced but this will vary by project.

9. Align the new valve vertically and tighten the compression nut onto the supply valve. Then placeone open-end adjustable wrench on the compression nut and the other on the supply valve. Tighten the compression nut. Be careful not to damage the valve, but the nut must be tight or it will leak. Once the nut is tight do not force the supply valve into a vertical position as this could cause damage to the water pipe joint behind the wall.

10. Now that the water supply valve is in place, take the toilet tank hose to the water supply valve and tighten it carefully.

11. Tighten the hose to the toilet shank a quarter turn past hand tight.

12. Keep the water supply valve in the off position and turn on the water main to the house.

13. Return to the toilet and check for any leaks near the water valve connection.

14. If there are no leaks, you can turn on the water supply valve.

15. The toilet tank will begin to fill, and you can inspect the valve and hose connections for any leaks.

16. Once the toilet tank is full, you can put back the toilet tank lid and the task is complete.

Mark Ligon is the Marketing Manager at Commercial Industrial Supply,an industrial distributor of a wide selection of PVC valves and other valves, fittings, pipe, and more. Mark enjoys completing DIY projects and offering advice to individuals interested in learning more about home improvement.

How to Hire the Right Electrician in West Chester

A professional electrician can fix your flickering lights or can help you install new lights and electrical devices when you are remodeling your house. Electricians offer varied services that help keep house efficient.

Electric installation is a huge responsibility and shouldn’t be taken lightly. Any error could lead to accident and possibly burn down of your house. So, it is essential that when you are hiring an Electrician in West Chester you need to find the right one. There are so many electricians around but not all of them are qualified to do the job. When hiring an electrician, you need to look at some important qualities in them.

Here are some of the ways you can hire the right electrician in West Chester;

Find them Online

Today, every competent business is online and has website to help people find them easily. So, look for electrician in West Chester online and see the results that come up. You will see companies located in West Chester. Visit the website to know more about the company. Go to their service pages and see what kind of services they are offering and whether it matches your requirements or not.

How long They Have Been in the Business

It is important that you hire an experienced electrician. The company should have at least 5 years of experience in providing electrical services. Hiring an experienced electrician will ensure that your home or workplace will be safe while they are at work. Electrical fixing and installation are not a child’s play and should only be handled by a professional for the safety of everyone in the home and office. Make sure you ask them about the years of experience they have in the field.

Licensed, bonded and insured

It is essential to hire an electrician in West Chester who is licensed, bonded and insured. All these things are important and show that the company or the service provider is authentic.

Having license means they have qualified for the job in terms of training and certification. Bonded and insured companies are covered for any kind of damage that may happen while they are at work. This means that if your property sustains any damage while repair work in on, you will be compensated for it. So, make sure to hire a company that is bonded and insured.

References or Testimonials

References and testimonials are one of the best ways to determine whether the company is reliable or not. When hiring an electrician in West Chester make sure to ask for references. This way you will be sure that they offer good service. Likewise, testimonials too can help you choose the right electrician for your electrical repair needs.

Ask the electrician if they can provide references and testimonials. If they are a good company they will have plenty of them. Don’t forget to cross check the references and testimonials.

How Do they charge

It is important that you know how the electricians charge. You should ask them if they charge by the hour or by work. Either of the option is good enough depending on the budget you have. If it’s a huge task like home remodeling or renovation then hiring an electrician who charges by the work will be much better option.

Small fixing and installation work doesn’t take much time, so if the electrician charges by the hour it won’t make any difference. It boils down to how you want to pay for the service and what is applicable to you.

Warranty and Guarantee

Ask the electrician in West Chester is they are offering warranty and guarantee on the service they are providing. It is essential that they do provide assurance so that your money invested doesn’t go waste.

A good electric service provider will offer warranty on their services and if there is a problem after they complete the task, they will fix it once again or return the money.

24/7 Emergency Services

The things with electrical things at home are that there can be an emergency like situation anytime. Electrical break-down at home or office can affect life and productivity of the place. Hire an electrician in West Chester who is available 24/7. This will ensure that you are always provided with some kind of support. Whether it’s the breakdown of your power system or alarm clock, a good electrician will always be available for your service.

The Bottom-Line

Hiring the right electrician in West Chester is very important. For hiring the right service provider you need to look for important things and also ask the right questions. Once you are satisfied that the electrician matches your needs you can hire and relax for any kind of electrical emergencies.

Why Hiring a Certified Electrician is Very Important

Electrical system is important for homes and offices.It is important to have fully functional electrical system to keep everything efficient. But sooner or later you will need the help of an electrician and when you do, you should look for a certified electrician.

Hiring the best electricians in Chester County PA is easy if you know what to look for. There are various important considerations for hiring an electrician and certification is one of them. Hiring a certified electrician is important in many ways. There are many electricians in PA, but not all of them qualified to do the job. Even for as mall task such as fixing the fan, you should hire a competent and qualified electrician.

Here are some of the reasons why you should always hire a certified electrician:

They are Qualified

When it comes to hiring from the best electricians in Chester County PA, a certified electrician is the one who is qualified to do the job. Electrical systems are very important and you need someone who has the knowledge and experience to perform the task correctly. Certification means that the technician has acquired the necessary skills needed to perform the task.

Electricians need to be trained and get certification as proof that they are qualified for the job.  Don’t be shy of asking to see the certification to ensure that are indeed certified to do the job.

For Safety

Electrician

You already know that electrical systems are very important for home and offices. But they are also dangerous and complicated. Accidents can happen and it can lead to sever damages. So it is important that you hire someone who is qualified and certified to perform the job correctly so that everything is safe before and after the competition of the job.

Electrical accidents can lead to fire and electric shocks, which is why you should never try DIY for complicated things. Make sure that the electrician is qualified, trained and certified so that you can get the best results. With the right electrician you can ensure that everyone is save inside the premises whether it is your home or office.

Fast and Efficient

Hiring a certified electrician also means that they can perform the task much faster. They are experienced and have the necessary skills so they can perform the task more efficiently. From fixing the lights to fans to installing an alarm system, a certified electrician can perform the task with greater efficiency and more accurately than a DIY project. This is the reason why you need the help of a professional electrician who is certified to the job.

For any kind of emergency situation you need a reliable electrician who can fix things quickly but accurately and ensure that everything is fine and safe. This is one of the reasons why you need to hire a certified electrician for your need.

Save Time and Money

Hiring the best electricians in Chester County PA can save you time and money. Fixing electrical things can take a lot of time for someone who is not experienced or doesn’t have the necessary skills. Hiring someone who is certified to do it will save you lots of time. DIY can go wrong and cost you money. Professional electrician has the knowledge and experience to do the job right the first time. They are also insured so if any damage is caused by them then you will be compensated for it.

Get advice

The best electricians in Chester County PA are qualified to give you advice on how to keep your electrical system efficient and well maintained. With the right advice you can keep your home and office efficient. They will also advice you on how often you should get your electrical systems checked by professionals so that major problems don’t occur,which may cost you lot of money.

With regular maintenance of your electrical system you can ensure that your home and office is always efficient and safe.

Hiring the Best Electricians in Chester County PA

Make sure that you check the credentials before you hire the electricians. They must have the license, insurance and are bonded. They must have the necessary experience needed and must belong to a reputed organization. Read online reviews and testimonials on sites like Angie’s List and BBA to see what other people are saying about the company. Cost is also an important consideration, so get quotes before you hire. Company quotes from different companies to see which one is offering the best service in your budget.

The Bottom-Line

Hiring the right electrician is very important for getting the best results. A certified electrician is what you need to ensure an efficient, safe and quick electrical repair or replacement work.

How to Avoid Bathroom Renovation Disasters

Hiring the right contractor for the bathroom renovation is one of the most important steps towards getting the desired results. It is not uncommon for the renovation work to go wrong.

The primary reason for such disasters is hiring the wrong team. Some of the nightmares include: poor workmanship, mounting bill and in the worst case, the contractors vanishing without finishing the job.

Majority of the people need the help of bathroom renovation services in NYC as they are not good at DIYs. If you want the right renovation work done, you need to hire the right team. Even the most obvious mistakes while hiring a bathroom contractor can cost you a lot of money and time.

The solution lies in hiring the best team for your renovation work. Here are some of the hiring mistakes you need to avoid:

Do a Little Research

Don’t outsource your search for a reliable contractor to anyone. Do a little research on bathroom renovation services in NYC. Even when you ask for recommendation from your family and friends, don’t forget to check them online or visit consumer forums to cross-check their credentials.

Ask for proof of insurance

A bathroom renovation contractor must have the proper documents to support their authenticity claim. Insurance is an important factor when it comes to hiring the right team. Make sure that the company holds personal liability, workers’ compensation and property damage insurance coverage.

The insurance coverage will provide you protection against any damage done to your property when the renovation work was going on. The company offering insurance is reliable and proves that they do care about their customers.

Check the company’s past performance with the BBB

The BBB – Better Business Bureau – offers ratings on companies based on their performance and their customer’s review. You can check the past performance of any of the bathroom renovation services in NYC with BBB.

You can easily see how the particular service is performing based on the rating. The website of BBB provide information about the company and also help resolve any complaint it may have. The information will help you make the right decision. They have almost 400,000 company information and are obviously one of the best places to find the right info.

Ask to see the contractor’s license

It is important that the contractors have up-to-date license. Some companies may lose the license for not adhering to the building rules and regulation of the locality. You can consult the local building department to check whether the company has proper license or not.

The licensing requirements can vary from state to state and its municipality. When you contact the department they can tell you whether the bathroom renovation service provider have proper license or not.

You will be surprise to know how many fraud companies can be active in an area. The only way you can avoid bathroom renovation disaster is by obtaining the right info.

Ask for a list of references

Asking for references is one of the best ways to find the right bathroom contractor in NYC. You can call a few of them to verify the claim of the company.

References can be faked. By calling the past customers, you can ask about the kind of projects the company worked on and if they were satisfied by the service. You will also gain idea on how efficient the team was, the time they took to complete the project and how talented the team was.

References can be of great help when it comes to choosing the right one from many bathroom renovation services in NYC. Good companies will offer the references or testimonial on their website. All you need to do is verify them.

Interview contractors

It is important that you and your contractor are on the same page when it comes to renovation work. You should interview more than one contractor for the job. Get to know them by telling about your renovation ideas. Make sure that the contractor you are hiring understands your requirements.

Communication is essential for choosing the right contractor. They should be polite, informative, helpful and expert in their field. You will get to know what kind of contractor they are when you interview them

Ask for written proposals and estimates

You need to ask for written proposals and estimates from the contractors even if they are reputed and have high recommendation. It will save you from unnecessary expenses. You pay what you see.

A good contractor will tell you upright how much the renovation will cost. The written estimates will also help you in sticking to your budget.

The Bottom Line

Hiring the right team for your renovation work is the key to getting quality work done. You can avoid any renovation disaster by hiring the right team for the job. Keep the important points in mind when hiring the contractor and have a great bathroom renovation in NYC.